Friday, May 11, 2012

Whirlpool 4396710P KitchenAid PUR Push Button Cyst-Reducing, Side-by-Side Refrigerator Water Filter, 2-Pack

Brand : Whirlpool
Rate :

Price : $54.23
Post Date : May 11, 2012 12:19:13
Usually ships in 24 hours

Make sure the water and ice from your refrigerator is as clean and fresh tasting as possible by replacing its water filter. This Whirlpool PuR water filter is used in Whirlpool, KitchenAid, Maytag, Amana, and JennAir side-by-side refrigerators with filter access in the base grille.

It's NSF-certified to reduce cysts, particulates (class I), asbestos, lead, mercury, and more. (The contaminants or other substances removed or reduced by this water filter are not necessarily in all users' water.) While it effectively removes contaminants from your water and ice, this filter also lowers the taste and odor of chlorine while retaining beneficial fluoride.

For the highest quality water and ice, your refrigerator's water filter needs to be changed over a period of time as its effectiveness at cleaning the water is reduced. For optimal results, you should replace this refrigerator water filter every 6 months to ensure clean, safe drinking water and ice.

Your refrigerator will even remind you when to change its filter, turning on an indicator light found near the water dispenser. Changing the filter is easy--just locate the old filter, twist and turn it until it becomes loose, then pull the old filter out and replace with the new filter.

This model (4396710) can be used to replace the following water filter model:

4396711

Replacing Your Water Filter

For side-by-side refrigerators with filter access in the base grille, follow these instructions for replacing your filter:

Push the eject button, then pull the filter cap. Do not twist cap.
Remove the filter cap by turning it counter clockwise. Set aside cap. Discard old filter.
Remove the packaging and O-ring covers from the new filter.
Align arrows on the cap and new filter. Turn clockwise to snap in place.
Push filter into the base grill until the eject button pops. Gently tug on cap to ensure it is snug.
Flush the water system until a total of 3 gallons (12 L) has been dispensed.

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Pyle Pro Sale 8pc California King 1200 Thread Count Down Alternative Bed In A Bag - Sage S... Fast

Monday, April 23, 2012

De'Longhi EC155 15 BAR Pump Espresso and Cappuccino Maker

Rate :

| Price : $81.79 | Post Date : Apr 23, 2012 03:45:08
Usually ships in 24 hours

Enjoy delicious espresso made your way with De'Longhi's pump espresso and cappuccino maker. You can choose to brew ground espresso or E.S.E pods with the unique patented dual filter holder. The choice is yours, making your espresso truly made to order. You can enjoy espresso or cappuccino at the perfect temperature with two separate thermostats. If you prefer cappuccino you'll enjoy using the easy-to-use swivel jet frother, which makes perfect drinks every time. Other highlights include self-priming operation to eliminate pesky start-up preparation, removable water tank and drip tray and a durable, high-quality stainless steel boiler to ensure many years of delicious espresso.

3.5mm Golden Anti-dust Plug Stopper For Casio Cell Phone... Fast

Wednesday, April 11, 2012

Hamilton Beach Big Mouth Juice Extractor 67650

Brand : Hamilton Beach | Rate :

| Price : $60.90
Post Date : Apr 11, 2012 08:34:04 | Usually ships in 1-2 business days

Big Mouth Pro Juice Extractor has extra large capacity feed chute , and strong die cast metal clips for professional style processing whole fruits & vegetables. Has super powerful 800 Watt motor for smooth, easy juice extraction, large dishwasher safe pulp bin . Stainless steel juice strainer. Juice cup included .Yields up to 24% more apple juice than a leading competitor.

Fits whole foods - for less pre-cutting
Easy to assemble and store
Powerful 800 Watt motor
Dishwasher safe parts
Includes recipes, tips and juicing cup
Extra-large pulp bin lets you juice longer - use pulp in recipes or for composting

Order Mud Pie Baby Clothing New Protective Decal Skin Skins Sticke For Lenovo Thinkpad Tablet 1838 16gb 32gb ... Derale 15450 Atomic-cool Remote Cooler... Cheap

Friday, April 6, 2012

Breville JE98XL Juice Fountain Plus 850-Watt Juicing Machine

Brand : Breville
Rate :

Price : $199.99
Post Date : Apr 06, 2012 06:38:14
Usually ships in 1-2 business days

Breville JE98XL Juice Fountain Plus 850-Watt Juicing Machine

Drink to your health. Get into the world of juicing with this no-nonsense dual-speed juice fountain. The Dual speed motor allows you to juice hard fruits and vegetables such as apples and beets on high speed by spinning the filter at 12,000 RPM. Low speed is optimal for softer fruits and leafy green vegetables such as cantaloupe and spinach. The Juice Fountain Plus cutting disc is so powerful that pineapple can be juiced in large chunks with the rind on. This updated model includes an improved 1 liter juice jug with froth separator and an overload protection LED to protect the motor.Easy, lightning-quick operation and simple clean-up. Healthier living starts here.

Buy 8½" Monster School Bus 4x4, Die-cast Metal Free Wheeling... Crazy Cut Small Bird Toy... Free Shipping Snow Blowers Toro Best

Sunday, March 18, 2012

KitchenAid KSM150PSWH Artisan Series 5-Quart Mixer, White

Brand : KitchenAid | Rate :

| Price : $223.81
Post Date : Mar 18, 2012 20:00:18 | Usually ships in 24 hours

KITCHENAID ARTISAN STAND MIXER *325 watts, 10 speeds *5 qt. bowl with handle *Includes pouring shield, wire whip, flat beater and dough hook *Tilt head platform *Boxed *White

325-watt mixer with 10 speeds; 5-quart stainless steel bowl
Tilt-back head for easy access to mixture
1 piece pouring shield with large chute for adding ingredients
Includes flat beater, dough hook, and wire whip
Measures 14 by 8-2/3 inches by 14 inches; 1-year warranty

Troy Bilt Garden Tiller Get It Now!

Wednesday, March 14, 2012

Keurig B60 Special Edition Gourmet Single-Cup Home-Brewing System

!±8± Keurig B60 Special Edition Gourmet Single-Cup Home-Brewing System

Brand : Keurig | Rate :

| Price : $149.00
Post Date : Mar 14, 2012 10:51:05 | Usually ships in 1-2 business days

Keurig B60 Special Edition Gourmet Single-Cup Home-Brewing System

The Special Edition Brewing System is our mid-luxury home brewing system that offers a blend of styling and convenient features. The Special Edition features chrome accents, a blue, back lit LCD display and three brew size options. Programmable features include a Digital Clock, Adjustable Temperature and Auto On/Off. The 48-ounce removable water reservoir holds up to eight cups before refilling and for the removable drip tray allows for easy cleaning and the use of travel mugs.At initial set up, once the machine is filled with water, it will take approximately 4-minutes for the water will be heated. During the heating period the red light next to ‘HEATING’ on the LED Control Center will become illuminated. Once the water is heated, the red light will turn off and the Small Mug Button will flash. Press the Small Mug Button to start a cleansing brew. Pour the hot water into the sink. The Brewer may take 15 seconds to reheat water between brews during which time the red light next to ‘HEATING’ on the LED Control Center may be illuminated. When the water has heated, the red light will turn off. The one-time set-up process is now complete and you are ready to brew!

More Specification..!!

Weber Genesis Grills Sale Roller Brush For Oreck Xl Upright Vacuum Cleaners... Ideas Cheap Keurig K Cups Immediately

Thursday, January 5, 2012

Refractive Lensectomy - Discover Life Without Glasses Or Contact Lenses

!±8± Refractive Lensectomy - Discover Life Without Glasses Or Contact Lenses

If you're as nearsighted as I am, you've probably fantasized about getting rid of your glasses or contacts forever. Many people choose Lasik (laser surgery to reshape the cornea), which takes care of their nearsightedness. Lasik is great if you're in your 20s or 30s, but it does nothing to address age-related presbyopia-the condition that forces most of us to wear bifocals or trifocals in middle age and beyond.

When I was in my late 30s an ophthalmologist recommended Lasik but added, "Of course, you'll still need to wear glasses to read or work on the computer." I guess he wasn't paying attention when I told him that I make my living as a writer and editor. I spend most of my waking hours reading and working on the computer. Why would I pay thousands of dollars for Lasik surgery if it meant I would still have to wear glasses most of the time?

I have never felt attractive in glasses. When you're very nearsighted, the lenses make your eyes look smaller. I wore contact lenses from age 18 to 40, but around my late 30s I began to notice that my eyes would turn red every time I put in my contacts. My eye doctor explained that I had "thin tears" that didn't form a good buffer between the contact lens and the surface of the eye. I decide that bloodshot eyes were even less attractive than Coke-bottle lenses, so I gave up on wearing contacts.

Then a few months before my 49th birthday I interviewed an eye surgeon for an article in a local magazine, and he told me about another option for nearsighted people in middle age and beyond: refractive lensectomy. Simply put, this procedure is cataract surgery before the insurance company will pay for it. Instead of replacing the natural crystalline lens of the eye with a monofocal lens (to correct nearsightedness or farsightedness but not both), the surgeon inserts a multifocal lens. Multifocal lenses (with trade names like ReZOOM, ReSTOR, and Crystalens), provide good vision at a variety of focusing distances.

Of course, there's a downside. The biggest drawback of refractive lensectomy is the cost: about 00 per eye, which is 2 to 3 times the cost of Lasik. But after 40 years of wearing corrective lenses (I got my first pair of glasses at age 9), I was eager to get rid of glasses and contact lenses forever. I wanted to rediscover the freedom of life without glasses. I divided the total cost by the number of days in 41 years (because I fully intend to live until I'm 90) and decided 60 cents a day was bargain for a spectacle-free lifestyle. As an added bonus, I would never have to deal with cataracts in old age.

One week before my 49th birthday I had surgery on my left eye, and two weeks later my right eye received its new ReZOOM lens. I was nervous before the first procedure but calmer the second time around because I knew what to expect. I kept a blog to preserve a detailed account of my surgery, recovery, and adjustment (see the first URL in the resource box).

Almost two years have passed since I got rid of my glasses and contacts forever, and I believe the results are well worth the expense and anxiety involved. I can drive my car and see my computer screen well enough to distinguish between a comma and a period in 9-point type, and I can read small print easily with the aid of a Verilux desk lamp or strong sunlight. Trying to read low-contrast print (yellow on a white background, for example) is hopeless, and so is reading in dim light. Threading a needle is a little tricky, but I can do it by the third try. I'm aware of a few more vitreous floaters than I noticed before the surgery, but they're not bad enough to interfere with my quality of life. Overall, I'm completely satisfied with my new "bionic eyes" and would recommend the procedure to any nearsighted middle-aged person who wants to experience the freedom of life without glasses.

Refractive Lensectomy - Discover Life Without Glasses Or Contact Lenses

Saved Poulan Gas Pole Saw

Monday, January 2, 2012

8 Beading Tips - How to Make Your Beading Projects Easy and Fun

!±8± 8 Beading Tips - How to Make Your Beading Projects Easy and Fun

Beading is a great way to let your creative side out. And some beading projects are very easy. You can easily make your own beaded necklace, bracelet or earrings. Here are several important tips for beginner beaders that will help you avoid common mistakes and make your beading projects easier and more fun.

1 Space your beads

Some types of beads especially semi-precious, Swarovski, glass and pearl beads require a spacer between them. You have two options - make a simple knot between your beads, or insert a decorative spacer. I prefer spacers, because they make the design more interesting. It is best to use silver or gold spacers with expensive beads - they won't loose the shine as they age.

2 Use a beading board

Before putting your beads on a wire lay them out on a jewelry layout board. You can buy these boards in any shop that sells, craft supplies, beads and beading tools. The board lets you see, how your design will work before you connect everything. If you don't have a board, use a plain light bath towel, so your beads don't scatter.

3 Don't let your beads roll

Even if you use a beading board, it is a good idea to cover the table you work on with a towel. Beads rolling all over the table can drive you crazy, but a towel will prevent it. Also, if you have a cat, cover your work with another towel, if you leave even for a few minutes. My cat can destroy hours of work in less then 30 seconds.

4 Cut enough string

If you are going to use knots, then cut the string 4 times longer than finished project plus a few extra inches, otherwise 2 times longer. Also you can fold your string twice or even four times, to make it stronger. This is particularly true if you use heavy glass beads and large beads.

5 String color is important

Your don't always have to use white string, buy a string that matches the color of your beads for this project. If you can't find a string in that particular shade, take a white one and dye it, any permanent marker would do the job.

6 Be careful - strings stretch

In my first beaded necklaces I always had this problem - you finish a necklace, than after a day of wearing it the string stretches and beads are no longer tight together, looks awful. To avoid this, after all the beads are on, hang your necklace for a day or so, than do the final knotting or attach clasps.

7 Secure the ends

Final knots are important, it is best to use square knots and tighten them firmly. Then apply some jewelers glue to your knots and only after that cut the loose ends

8 Be kind to your eyes

Beading for several hours can give you a bad eye strain, especially if you are working with seed beads. So always have a good light on, a desk lamp is best. Another useful tool would be a magnifying glass. It will also help keep your project neat and avoid small mistakes.

Happy beading!